The RIK0006B Kit consists of two, dual SPDT RF switch modules, for a total of four SPDT switches. The switches are attached in the test fixture by standard 3M double sided adhesive tape. The unused port retrun loss is reflective in nature.

• Figure 1 : Physical representation of the Switch Top Side view.
• Table 1 : Pin Out
• Table 2 : Typical Performance
• Figure 2 : RF Default Conditions
• Figure 3 : Insertion Loss Measurement.
• Figure 4 : Isolation Measurement / Common to Inactive Port.
• Figure 5 : Isolation Measurement / Active to Inactive Port.
• Figure 6 : Return Loss Common Port
• Figure 7 : Return Loss Active Port
• Figure 8 : Picture

Description	Connection	Type	Notes
+5V Supply	H1-7 & 8	Header Pin
Switch 1 Control	H1-3	Header Pin
Switch 2 Control	H1-6	Header Pin
Ground	H1-4/5
Switch 1, Pole	J3	MCX Female	DC Blocked
Switch 1, NC	J1	MCX Female	DC Blocked
Switch 1, NO	J2	MCX Female	DC Blocked
Switch 2, Pole	J6	MCX Female	DC Blocked
Switch 2, NC	J4	MCX Female	DC Blocked
Switch 2, NO	J5	MCX Female	DC Blocked

Figure 2
Default Settings

Figure 3
Insertion Loss

Figure 4
Isolation Common to Inactive Port

Figure 5
Isolation Active to Inactive Port

Figure 6
Common Port Return Loss

Figure 7
Active Port Return Loss

Figure 8
Picture