RI Title
RI logo

RIK0296B

<>
  1. Home
  2. Products
  3. RIK Catalog
  4. Fixture Inserts

Browse Kits

Parts List

New

Engage Digital Insert, Engage, 20 pin, REVERSED

Universal Digital to DUT, 20 REVERSED pins for use with Open Engage Plate

Part Number: RIK0296B

In Stock: 0

Estimated Restocking Time: 12+ weeks (limited)

$1,000
NOTE: Thread-locking fluid (RIK0204A) should be applied to screws.

For use with the RIK0304A Open Fixture Prober Engage Plate and the RI8535x Universal Digital TIM to DIB - Connects High Speed Digital via Coax Ribbon cable to the DUT.

This insert CAN NOT be mounted, side-by-side, next to itself. The connection to the Digital cable connector is too wide to be mounted side-by-side. You CAN mount OTHER Inserts directly next to the Digital Insert, but just not another Digital insert.

IMPORTANT: Pins reversed from RIK0137A used with the Matrix Top plate so that Pin 1 is rotated 180 degrees.
This is due to the mounting plate oriented the opposite way, so the inserts are mounted with the connector oriented on the outside of the rail vs the inside. Flipping the PCB 180 degrees also flips the pin map.

The Launch has 24 pins, 20 Digital and 4 Ground. The ribbon cable from the TIM Block has 40 pins.

Requires Digital Block:
Part #ApplicationsDescriptionOUT Type
Product Catalog
RIK0141ADigital TIM to Inserts (Up to QTY 4 RIK0137A) or Pogos (RIK0147A)Digital TIM Block 80 Pins with CablesDIGITAL
Product Catalog
RIK0142ADigital TIM to Inserts (Up to QTY 6 RIK0137A) or Pogos (RIK0147A)Digital TIM Block 120 Pins with CablesDIGITAL
Product Catalog
RIK0146ADigital TIM to Inserts (Up to QTY 2 RIK0137A) or Pogos (RIK0147A)Digital TIM Block 40 Pins with CablesDIGITAL

Related Documents:


Product Docs
Digital TIM or Fixture Digital Module Best Practices - How to Avoid Failure Interfacing Due To Wiring Ringing Effects

Database 'Product Docs', View 'All Documents', Document 'Test Fixture Design - Matrix Fixture Dut Interface Board (DIB) Layout' Test Fixture Design Matrix Fixture Dut Interface Board Layout



Engage digital launch drawing.pdfEngage digital launch drawing.pdf Updated revB with the PIN IDs correct.




IMPORTANT: Digital PAD Rotated 180 degrees from the Matrix Top Plate compatible RIK0137A Launches! Pins reversed so that Pin 1 is rotated 180 degrees. This is due to the mounting plate oriented the opposite way, so the inserts are mounted with the connector oriented on the outside of the rail vs the inside.

← DUT


First pin pictured above is Pin 4(S101_19)

Item Ref Part Number QTY Description Category Qty in Stock
1ARV4FT5A1RIK0137A Package Back PDF (Sheet of 4)*Dcmnt
2M673SZ1A1SCREW, FLAT PHIL, 4-40 X 1/4", SS, BLK OX, W/NYLOCKHrdwr
3MNHA471A1RIK0137A Pinout Instructions for UseDcmnt
4MRU4K51A1Clam Shell Packaging Inside Cavity 3.124W"X2.5H"X 1.25DSppls
5MRURC91A1Packaging Foam, 1" Anti-Static for Clamshell Packaging, GR 5GCW5Sppls
6MSYA061A1Packaging, #0 CapsuleSppls
7Y0006HA11Digital Pogo Bd*PcbAssy
BOM Refreshed:05/11/2020 06:26 PM